datasheet . www.perkinelmer.com/opto pe500c-13f and PE500C-13UV cermax ? focused xenon arc lamps lighting imaging telecom cermax ? xenon arc lamps applications ? medical and industrial fiber optic illu- minators ? machine vision ? infrared and visible spotlights/beacons ? spectroscopy ? microscopy ? uv curing ? video projection description the cermax? xenon arc lamp is an innova- tive lamp design in the specialty lighting industry. these lamps were introduced in the early 1980?s and are now used in endo- scopes in most major hospitals worldwide, in high brightness projection display sys- tems, and for a wide variety of other high performance applications. the pe500c-13f and PE500C-13UV cermax? lamps have an integrated elliptical reflector, enabling high intensity, focused output of ultraviolet, visible, and infrared radiation. with their internal reflector and rugged ceramic body construction, cermax? lamps are the safest and most compact alter- native to conventional quartz xenon lamps. this makes them ideal for applications that require a high degree of illumination control. current-regulated or power-regulated power supplies with output ripples of less than 5% are recommended. single shot ignition pulses are advised because radio frequency starters may damage the lamps internal reflector. in addition to lamps, perkinelmer optoelectronics manufactures cermax? arc lamp power supplies, lamp holders, oem lighting systems, and fiber optic light sources.
perkinelmer welcomes inquiries about special lamps. we would be pleased to discuss the requirements of your application and th e feasibility of designing a lamp specifically suited to your needs. for more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto. all values are nominal; specifications subject to change without notice. ? 2000 perkinelmer inc. all rights reserved. . www.perkinelmer.com/opto usa: perkinelmer optoelectronics 44370 christy st. fremont, ca 94538 phone: (510) 979-6500 fax: (510) 687-1140 toll free: (800) 775-6786 europe: perkinelmer optoelectronics gmbh wenzel-jaksch-str. 31 65199 wiesbaden germany phone: +49 611 492 0 fax: +49 611 492 369 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: +65 775 1008 description nominal range power 500 watts 350-525 watts current 32 amps (dc) 25-35 amps (dc) operating voltage 15.5 volts (dc) 14-16,5 volts (dc) ignition voltage 30 kilovolts (recommended minimum) temperature 150o c (maximum) lifetime* 1000 hours (500 hour warranty) * end of lamp life is defined as 50% of initial output. operational specifications output at nominal power pe500c-13f and PE500C-13UV physical specifications description specification arc gap .045 inch (1.14mm) reflector geometry ellipsoidal 1= x 2 /m 2 +y 2 /n 2 weight 191 grams window diameter 1 inch (25.4 mm) focused output f= uv filtered output/ uv = uv enhanced output description pe500c-13f radiant output* 112 watts uv output* 5 watts ir output* 65 watts visible output* 10500 lumens color temperature 5900 kelvin peak instabilities 4% spot size at crossover .07? at 50% pts spot size at crossover .23? at 10% pts *these values indicate total output in all directions. wavelengths = uv<390nm, ir>770nm, visible 390nm to 770nm. ** beam geometry defined as half angle at 10% pts after 01/100/1000 hours. notes 1. lamp must not be operated with window facing upwards within 45o of vertical. 2. seal temperature must not exceed 150o c. 3. current/power regulated power supplies and perkinelmer lamp housing units are recommended. 4. lamp must be operated within recommended current and power range. over powering may lead to arc instability, hard starting and premature aging. 5. cermax lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. however, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200o c, and their ir and uv radiation can cause skin burns and eye damage. read hazard sheet included with each lamp shipment. dimensions dimensions in parentheses are in millimeters c l ellipse refector edge m=1.3647 n=0.731 focal point cathode .666 (16.92) .008 (.203) .212 (5.39) 1.750 (44.45) 2.17 (55.1) .645 (16.4) .035 (.89) .25 (6.35) .40 (10.2) 1.00 (25.4) 1.00 (25.4) .75 (19.05) .259 (6.58) .241 (6.12) 1.298 (32.97) 1.67 (42.4) PE500C-13UV 112 watts 10.3 watts 63 watts 9550 lumens 5050 kelvin 4% 0.7? at 50% pts .23? at 10% pts description visible output* total output 6mm aperture 7200 lumens 70 watts 3mm aperture 3600 lumens 35 watts * nominal values at 500 watts after 2 hour burn-in spectral output relative output f uv f + hot mirror wavelength (nm) 200 300 400 500 600 700 800 900 1000 1100 100 80 40 20 0 60 ds-169 rev c 1101
|
